About Modesty
About Modesty
Designer
Martin Francis, UK (One Off)
Wharf
Trehard Navales, Antibes France 1984
Accommodation
On board it is under every circumstances comfortable, all the movement space outside and the quietness below deck. In the saloon there is a navigation section with all the required systems a good equipped galley. A large saloon to drink or dine. There are 4 cabins on board, who has space for 9 people, 2 of the cabins have a double bed. all with there own heads
L.O.A ; 23 mtr (75ft)
L.W.L ; 20 mtr (66ft)
Width ; 5,4 mtr (17,5ft)
Draft ; 2,9 mtr (9,5ft)
Displacement ; 56 ton (with full tanks)
Diesel tanks;
2 x 1500 ltr (tot. 3000 ltr = 792,5 US Gallon (aluminum)
Water tanks;
total 4000 ltr (1057 US Gallon) in 3 tanks (aluminum)
Engine;
Perkins T6.3544M 185Hp (1985) met dubble fuelfilter with vacum meter(2012)
Traction;
Hydraulische gearbox V-Drive ZF, Maxprop 3 blade prob, reserve fixed prob, 3 blades
Generator;
• Northern Light 8Kw 230V 50Hz (2008) incl. sound silence box/cover and gas/water separator in exhaust
•Hydro Generator on the main engine 6Kw 380V 50 Hz (overhauled 2008)
Power supply;
• 12 x 2V glass mat batteries (total 24V 870 Ahr) (2008)
Power net;
•12V 24V 230V-50Hz 380V-50Hz
•2 Dynamo’s 90 Ah 24V on main engine
•1 Victron battery charger 24V 40A 90-250V (2008)
•2 Victron charger / inverter 24V 3000W (2008)
•1 Victron charger / inverter 24V 5000W (2010)
•1 remote reading and control on switch panel
Water maker;
•Echotec 120l/h 230V-50Hz (2010)
•2 raw water filters 20 micron en 5 micron
•Back-flush installation
Hot water;
80 liter (22 US Gallon) electric water heater (2015)
Black water tanks;
2 x 70ltr (2 x 18,5 US Gallon)
Dive compressor;
•Bauer 380V
•4 air-bottles
Washing machine;
• LG 11kg (2011)
Deck-wash installation;
•Salt water High Pressure (2012)
•Fresh water High Pressure (2012)
Bilge-pump;
2 x membrane pumps, 1 x centrifugal pump
Anchor;
•Hydraulic anchor windlass (2x)
•1 Rocna 70kg -154lbs (2012)
•1 CQR 72lbs
•110mtr chain 14mm
•2 Gypsie chains on horizontal shaft
•2 x chain-locker with drainage and drain-pump
•service locale and at steering position
Navigation Equipment
• Raytheon Arpa radar R40XX
•Hardruged PC with chartworks software, incl. maps, 2 x 15inch screen, at chart-table and at the steering position (2015)
•AIS (2015)
• Furuno Navtex (2008)
•Depth sounder
•Icom VHF/DSC IC-M603 (2008)
•Icom VHF Handheld (2008)
•(2)Furuno GPS GP32 (2008)
•Cresta Weather Station (2008)
•Simrad autopilot AP 28 hydro (2009)
•Fixed WIFI antenna in Mizzen (2015)
•Satellite Telephone (2013)
Heating system
• Webasto Diesel heater
Power Supply
•Hydro generator 380v 7.5 Kva
•Northern Light 8kW generator 230v/50 Hz
•1 Victron Quattro 24 volt, 5000va 120 amp
•2 Victron Multi plus , 24V 70 amp 3000 VA (1 spare)
•1 Victron charger 24V /100A
•1 Victron inverter 24/12V
•12 glass mat batteries 2V total 860 AH:24V
•2 dynamo 90A/24v
•2 starting battery 120A
Water-maker;
• Echo Marine, 120 ltr/h (31,7 US Gallon p/hr) (2010)
Dinghy;
• Dinghy, AB Lammina 11al (aluminum bottom) with a Tohatsu 25hp outboard (2011))
Winches Cockpit
• 2 x ST65 Hydraulic 2 Speed *
• 3 x ST55 Manual 2 Speed
• 2 x ST48 Manual 2 Speed
• 1 x ST46 Manual 2 Speed
Winches Main Mast
• 1 x ST55 Hydraulic 2 Speed *
• 1 x ST55 Manual 2 Speed
• 2 x ST48 Manual 2 Speed
• 1 x ST43 Manual 2 Speed
•service local and by steering Wheel
Mast;
•Reckman 1995/1996
•Main amd Mizzen; In mast Furl Hydraulisch
•Genua en Cutter ; Furl Hydraulisch
Running sheets;
All renewed between 2008-2012 (complete list available)
Sails and Rigging
•Mainsail 80,5 m2
•Mizzen 30,5 m2
•Genua 125% 145 m2
•Cuttersail 48 m2
•Spinnaker 285 m2
•Spinnaker 360 m2
•Staysail 38,5 m2
Hydraulic installation;
Part original and part adapted during major refit is 1995/1196. in 2011 all the seals has been replaced. The whole system is built from industrial components
• 1 tank 200ltr
•1 Hydropump 24V
•1 Hydro cylinder backstay mainmast* 12 Ton (below deck)
•1 Hydro cylinder backstay mizzen * (Navtec)
*reading system presure and backstay pressure by steering wheel
Steering
• kabelsteering
•Rudder on skag
•Rudder shaft, diameter 140mm, 2 bearings in ‘bulletproof’ construction
•Emergency tiller
Autopilot;
•Simrad AP28 (2009)
•1 Hydro steering-pump (including a spare pump)
•1 Heavy cylinder on main-system (renovated 2012)
Fire extinguisher;
3 x foam, 6kg (2008) wheel-mark
Ventilation;
6 x stainless steel wind-scoops/ dorade (Belship) 2008
Galley;
• 6 burner stove, 5 gas, 1 electric with gas-oven
• freezer 70 ltr (seawater cooling)
• Cooling; 2 x 180 ltr en 1 x 200ltr (all have the possibility to be used as freezer)
Gasinstallation;
1 fixed gas pipe to galley
electrical solenoid velve in gas-bottle storage. service in galley
4 Aluminum bottles 20kg in a secured locker with a drain (high pressure test of the bottles in 2012)
Safety;
•Epirp
•2 x 6 persons life-raft
•lifejackets adults and children
•harnesses
•2 x horseshoe
•1 x trowline
Entertainment;
Saloon; Radio met CD, MP3 and IPod connection -
Build in Waterproof Flatscreen with glass protection-screen, watertight in a stainless steel frame for TV/PC
Speakers inside and outside
Master-cabin; Flatscreen LED Smart TV (2015)
Upholstery Outside;
Bimini above table and steering position (2010) (including Side en stern-covers)
Tent Above bridge-deck en doghouse (2010)
3 custom made wind/rain scoops for hatches (2010)
Cushions around the table (sunbrella 2012)
Big mattress, sunbrella 2012
Foldable mattress, sunbrella 2012
Upholstery inside;
Leather, foam replaced in 2012
Refit 2011;
underwaterschip sandblasted and treated by 4 layers of epoxy-primer
Refit 2012;
Hull;
Locally sandblasted, treated by epoxy primer and 4 layers of AWL-Grip
New windows (glued)
Ships name and logo sprayed in AWL-Grip
new waterline in AWL-Grip
swimming-platform + steps welded in aluminum, completely sandblasted en treated with epoxy, after that sprayed with the rest of the hull
Cockpit - bridge-deck - doghouse - cockpit table - steering position;
Completely sandblasted, epoxy treatment and sprayed with AWL-Grip, after that new teak (completely glued with sikaflex bedding compound)
Teak has a minimum thickness of 15 mm
Deck;
locally sandblasted, completely treated with epoxy, sprayed with AWL-Grip and 2 layers of non skid paint
Hatch front deck
Completely renewed plus a new window
Booms, main, mizzen and spinnaker sprayed with AWL-Grip
Rail, main traveler renewed, traveler cars renovated
N.B.
on board a lot of spare-parts for;
•main engine
•generator
•pumps
•hatches
•paint-system
•water-maker
•electrical installations
•hydraulic installation
This Yacht is Based in The Netherlands
TOOLS, ART AND PERSONAL INTEMS DO NOT BELONG TO THE INVENTORY
Exteriour
Interiour